Date: Sun, 1 Nov 2009
From: Alex Chernov <alex_stovemaster(at)yahoo.ca>
Subject: Re: Bell testing
To: mheat(at)heatkit.com, Dave Misiuk <misiuk(at)alaska.net>
Hi Norbert, Dave.
Here are the results for the test plus raw data. I cut the test at 2 hours, but raw data has all 2hr 20min. Filter was taken out at 2hr 20min. Pretty clean burn at 1.12g/kg. No smell from the filter. Almost no CO spike at the beginning. CO climbs up at the end, as usual. O2 a bit on high end - efficiency somewhat lower for that reason.
--- On Fri, 10/30/09, Dave Misiuk <misiuk(at)alaska.net> wrote: